01-standard POF shrink film

Our POF shrink film has been tested by SGS according to American FDA Standard, and meet the regulations of contacting with foods. It doesn’t emit harmful gas during usage. It is an economic product and works easily on most packaging machines.This film can be printed with 8 colors.

01-standard POF shrink film

Product Performance:

① Environmental protection with high quality.
② High seal strength.
③ High shrinkage ratio.
④ Sealed packaging to prevent from ash and warm.
⑤ Lightness,toughness, flexibility and even thickness.
⑥ Endurable cold at low temperature.
⑦ Fine heat sealing performance.

Main Parameter Data

Product	01 STANDARD POF SHRINK FILM
Property	Unit	Test Method	Representative Value
Physical Property
Thickness	Micron		10 / 12.5	15	19	25
Density	g/cm3		0.922	0.922	0.922	0.922
Tensile Property (MD/TD)
Elastic Mouduls	N/mm2	ASTM-D882A	330/450	340/450	350/450	360/450
Tensile Strength	MPa	ASTM-882	110/110	110/110	110/110	105/105
Elongation at Break	%	ASTM-882	105/110	110/110	110/110	110/115
Seal Strength	g/cm3	Internal Method	610	870	1025	1250
	N/mm2		40	57	53	49
Tear Propagation	g/cm3	ASTM-D1938	6.0	5.5	9.5	14.5
COF film to film	Adim	ASTM-D1894	0.20	0.20	0.20	0.20
Free Shrink at 130℃	%	ASTM-D2732	70/70	70/70	70/70	70/70
Optical Property
Haze	%	ASTM-D1003	1.1	1.3	1.8	2.3
Gloss	photoc	ASTM-D2457	135	135	135	130
Dimension Specification
Width	mm		200--1600
Length /roll	S/S(single layer)		3200m	2665m	2135m	1600m
	C/F(center fold)		1600m	1332m	1067m	800m

Values listed are average test values to be used for information purposes, subject to possible variations.

Products are to be stored in dry conditions below 35 deg. Cent.

Picture show